From water and steam to lubricants, chemicals and gases, Technetics Group has the high performance thread sealant tape your most critical applications require. Our range of PTFE thread seal tapes are commonly used in critical applications where high sealing power is required along with a minimum amount of material.

About Technetics Group PTFE Thread Seal Tape

Technetics Group’s thread sealant tape is not the standard PTFE tape. Our tape features higher density and is made to withstand the harshest conditions your applications face. Our self-lubricating PTFE thread seal tape provides quick, clean, sealing of male pipe threads, tears cleanly and seals neatly so you can use less tape on the job.

Product Features

  • Available in a wide variety of standard and custom densities and thicknesses to meet your critical needs
  • Standard and custom colors available
    • Permits quick, clean sealing of male pipe threads of all sizes and eliminates the risk of system contamination common with liquid and paste sealants
    • Self-lubricating quality makes joints easy to assemble and disassemble, and extends the fatigue life of sealed connections
    • Virtually chemical inert, non-toxic, non-absorbent and nonflammable
    • Custom solutions for packaging and private labeling are available

Industries and Applications

  • White for general purpose
  • Yellow for gas lines, high density or full density
  • Green for oxygen lines, full density
  • Pink for water lines, full density
  • Gray for anti-seize, full density
  • Custom colors and/or densities can also be developed

Properties and Technical Information

  • Technical Characteristics
    • Typical Density Ranges:
      • Standard: 0.5 – 0.9 g/cm3
      • Premium/High Density: 1.0 – 1.2 g/cm3
      • Premium/Extra-High Density: 1.2 – 1.5 g/cm3
      • Full Density: 1.5 – 1.7 g/cm3
    • Typical Widths: 1/2″, 3/4″ and 1″
    • Typical lengths per spool: 260″, 520″, 1296″
  • Extreme Temperature and Pressure Performance
    • Temperature: from -450˚F to 500˚F (-240˚C to 260˚C)
    • Pressure: from hard vacuum to 2,000 PSI
  • Meets Critical Requirements
    • UL Mark of Safety
    • Extra-high and full density tapes meet MIL CID A-A-58092
  • All our PTFE thread seal tapes are made in the USA